Rievtech ELC-12AC-R-N, Руководство пользователя

Страница: 158 / 393

158
The Property in dialog box of “Modbus Write” shows as below figure:
1. Slave Address: 1 is default
2.Communication parameters
：
BPS is baud rate
、
Stopbits
、
Databits
、
Communication type: RS232
、
RS485 .
Actually RS232 or RS485 are just interface of xLogic.
3. Command, register address and register count
Command Function description remark
05
Force the switch status of single coil
（
00000
～
0XXXX
）
Force Single Coil
（
output
）
06 Pre-set the data of single register
（
40000
～
4XXXX
）
Set single output register
15
Force multi-coils on/off bit
（
00000
～
0XXXX
）
16
Write multi-holding registers data
（
40000
～
4XXXX
）
4. Where is to save the pre-configuration data that would be written to Slave. It contains 2 kind ways to
pre-configuration. One is auto mode, this data uses the flags in the program, such as FM, AFM, I, Q and
AQ. The manual mode is input a fixed value or bit status.