Riello SC ACS 160, Руководство пользователя

Страница: 21 / 44

21
ENGLISH
DISPLAY AND PROGRAMMING
With its clear graphic and text interface, the display (1)
provides intuitive guidance on the operation of the con-
troller.
The LED (2) lights up green when a relay is switched on.
The LED (2) lights up red when operating mode ‚Off‘ is set.
The LED (2) flashes quickly red when an error is present.
Entries are made using 4 keys (3+4), to which contextual
functions are assigned. The "esc" key (3) is used to can-
cel an entry or to exit a menu. If applicable, a request for
confirmation appears to save the made changes.
The function of the other 3 keys (4) is shown in the display
right above the keys. The right-hand key generally has a
confirmation and selection function.
Examples of key functions:
+/- = increase/decrease values
↑ / ↓ = scroll menu up/down
Yes/no = agree / reject
About = further information
Back = to the previous display
Ok = confirm selection
Confirm = confirm setting
MENU SEQUENCE AND MENU STRUCTURE
Schematic or overview mode will appear if no key is
pressed for a period of 2 minutes, or if "esc" is pressed to
exit the main menu.
Pressing any key in schematic or overview mode, the
main menu reappears. The following menus are available:
Exit main menu
OK
esc
1.Measurements
2.Statistics
1. Measured values Measured sensor values
2. Statistics
Operating hours counters
3. Display mode Selection of schematic mode or overview mode
4. Operating mode Automatic mode, manual mode, or controller Off
5. Settings Management of parameters required for normal operation
6. Special functions Program selection, sensor calibration, clock, additional sensor, etc.
7. Menu lock
Lock entry against unintentional changes at critical points
8. Service data Operating values
9. Language Language selection
esc
(1)
(2)
(3)
(4)
Pump (rotates when active)
Mixer (black when active)
Valve (direction of flow black)
Flow sensor
Thermostat
Collector
Storage / buffer
Hot water storage tank
Temperature Sensors
Heat exchanger
Cascade
Further symbols can be found in the special func-
tions.