Riello RS 310/EV BLU FS1, Инструкции по установке, использованию и обслуживанию

Страница: 47 / 80

45 20081753 GB
Start-up, calibration and operation of the burner
The value 1 appears on the display screen:
After approx 8 seconds (it depends on the duration of the pro-
gramme), the
0 value appears on the display screen, this is to in-
dicate that the restore process has been completed correctly.
NOTE:
When the restore process is successfully completed, the 0
value is shown on the display screen.
Err C information: 136 D: 1 (restore process initialised) is
displayed for a brief moment.
NOTE:
If an error occurs during the backup process, the display
screen shows a negative value.
Refer to diagnostic code 137 to determine the cause of the
error (see section “List of parameters” on page 46).
IMPORTANT
At the end of the restore process, it is neces-
sary to check the sequence of functions and
the list of parameters.
WARNING
It is advisable to perform a backup every time
that a parameter is changed, after checking
that the modification carried out is correct.
D
1
2
1
4
5
h min s
%
P
V
D
1
2
1
4
3
h min s
%
P
V