Riello RS 310/EV BLU FS1, Инструкции по установке, использованию и обслуживанию

Страница: 11 / 80

9 20081753 GB
Technical description of the burner
4.4 Technical data
Tab. C
(1)
Reference conditions: Ambient temperature 20°C - Gas temperature 15°C - Barometric pressure 1013 mbar - Altitude 0 m a.s.l.
(2)
Pressure at the test point of the pressure switch 5) (Fig. 5) with zero pressure in the combustion chamber and at maximum burner output.
(3)
Sound pressure measured in manufacturer's combustion laboratory, with burner operating on test boiler and at maximum rated output. The sound
power is evaluated, in line with the regulations, on a spherical surface centred on the burner and with a radius of 1 metre.
4.5 Electrical data
Tab. D
Model RS 310/EV BLU RS 410/EV BLU RS 510/EV BLU RS 610/EV BLU
Type (FS1/FS2*) 1138T2 1135T2 1136T2 1137T2
Power
(1)
Delivery
(1)
min - max kW 400/1200 - 3630 500/1500 ÷ 4450 680/1800 ÷ 5250 1000/2200 ÷ 6250
Fuels Natural gas: G20 (methane gas) - G21 - G22 - G23 - G25
Gas pressure at max. output
(2)
Gas: G20/G25
mbar 50.1/74.7 53.1/79.2 59.7/89.1 77.6/115.8
Operation FS1: Intermittent (min. 1 stop in 24 hours) - FS2: Continuous (min. 1 stop in 72 hours)
Standard applications Boilers: water, steam, diathermic oil
Ambient temperature °C 0 - 50
Combustion air temperature °C max 60
Noise levels
(3)
Sound pressure
Sound power
dB(A)
78
89 80
91 82.5
93,5 85
96
Model RS 310/EV BLU RS 410/EV BLU RS 310/EV BLU RS 410/EV BLU
Type (FS1/FS2*) 1138T2 1135T2 1138T2 1135T2
Main electrical supply 3 ~ 230V +/-10% 50 Hz 3N ~ 400V +/-10% 50 Hz
Fan motor IE2
rpm
V
kW
A
2900
230/400
7.5
23.9 - 13.8
2920
230/400
9.2
29.3 - 16.9
2900
230/400
7.5
23.9 - 13.8
2920
230/400
9.2
29.3 - 16.9
Ignition transformer
V1 - V2
I1 - I2
230V - 1 x 8 kV
1A - 20mA
Absorbed electrical power kW max 9.1 10.8 9.1 10.8
Protection level IP 54
Model RS 510/EV BLU RS 610/EV BLU
Type (FS1/FS2*) 1136T2 1137T2
Main electrical supply 3N ~ 400V +/-10% 50 Hz
Fan motor IE2
rpm
V
kW
A
2880
400/690
12
21.2 - 12.2
2920
380/660
15
29.5 - 17
Ignition transformer
V1 - V2
I1 - I2
230V - 1 x 8 kV
1A - 20mA
Absorbed electrical power kW max 14 17
Protection level IP 54
WARNING
*The burner leaves the factory set up for FS1 op-
eration. If FS2 operation is required, see section
“Modify the parameter for continuous/intermittent
operation (FS2/FS1)” on page 40.