5840
1
GB
INDEX
1.
BURNER DESCRIPTION
One, two, third stage fuel oil burner.
1.1
EQUIPMENT
Flexible tubes . . . . . . . . . . . . . . . . . . . . . . No. 2
Nipples . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Shield for flange . . . . . . . . . . . . . . . . . . . . No. 1
Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . No. 3
Cable grommets . . . . . . . . . . . . . . . . . . . . No. 5
Screws . . . . . . . . . . . . . . . . . . . . . . . . . No. 4
Fitting for operation with fuel oil. . . . . . . . . . . . .
Gasket . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
emulsified (see page 12) . . . . . . . . . . . . . No. 1
1.
BURNER DESCRIPTION . . . . . . . . . . . . . . 1
1.1
Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.
TECHNICAL DATA . . . . . . . . . . . . . . . . . . 2
2.1
Technical data . . . . . . . . . . . . . . . . . . . . . . 2
2.2
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 3
2.3
Field of operation . . . . . . . . . . . . . . . . . . . . 3
3.
INSTALLATION . . . . . . . . . . . . . . . . . . . . . 4
3.1
Fuel oil supply line. . . . . . . . . . . . . . . . . . . . 4
3.2
Electrical system . . . . . . . . . . . . . . . . . . . . 5
3.3
Electrical connections . . . . . . . . . . . . . . . . 6
4.
OPERATION . . . . . . . . . . . . . . . . . . . . . . . 7
4.1
Choice of nozzles . . . . . . . . . . . . . . . . . . . 7
4.2
Pump pressure . . . . . . . . . . . . . . . . . . . . . 7
4.3
Combustion head setting. . . . . . . . . . . . . . . . 7
4.4
Air damper adjustments . . . . . . . . . . . . . . . . 8
4.5
Atomisation temperature adjustment. . . . . . . .9
4.6
Start-up programme . . . . . . . . . . . . . . . . . . 10
4.7
Three stage operation . . . . . . . . . . . . . . . . . 10
4.8
Ecological oil burners . . . . . . . . . . . . . . . 11
4.9
Emulsified fuel oil operation . . . . . . . . . . .11
4.10 Start-up programme diagnostics . . . . . . . .12
4.11 Operating fault diagnostics . . . . . . . . . . . .12
O
The burner meets protection level of IP 40, EN 60529.
O
Burner with CE marking in conformity with EEC directives: EMC 2004/108/EC, Low Voltage
2006/95/EC and Machines 2006/42/EC.
1 -
Suction line
2
- Return line
3
- Air damper opening motor
4
- Pump pressure adjustment screw
5
- Manometer fitting (G1/8)
6
- Vacuometer fitting (G1/2)
7
- Reset push-button of the motor overload relay
8
- Electrical control panel
9
- Cable grommets
10
- Control box reset push-button and
lock-out indicator
11
- Adjustment thermostat
12
- Regulating screw for combustion head
13
- Terminal block
14
- Ignition transformerL
15
- Double filter
16
- Valve assembly
17
- Manometer
18
- Indicator light
19
- Commutator
20
- Low limit thermostat
21
- Pump motor starter
22
- Pump motor
23
- Maximum thermostat
24
- Timer
25
- Air pressure switch
D3521
Fig. 1