17
USE AND ADJUSTMENT
8
USE AND ADJUSTMENT
8.1
Control panel: description
The digital Master control panel of the Condexa Pro2 EVO is locat-
ed in the external cabinet. It is possible to operate on the master
contro.l panel opening the cover with the plexiglass window.
The various buttons on it allow you to perform a variety of func-
tions ranging from simple monitoring of the main parameters to
the system configuretion of the device depending on the type of
plant which is located downstream of it.
The control panel was designed to enable the user to enter the
various user modes; each one of these has a set of correspond-
ing functions, activated by pressing a button or combination of
two buttons pressed together. Furthermore, each button has a
specific function depending on the selected user mode.
Figure 20
BUTTON
KEY
DESCRIPTION
S1
Reset button
Serves to release the electric board after a permanent arrest
S2
Set/esc button
Press to enter parameter mode and monitor mode for individual units
S3
System selection button
Press to visualize functional status of the various master systems
S4
Increase button
Press to increase a specific value
S5
Reduce button
Press to reduce a specific value
S6
Confirmation button
Press to memorize new values
U2
Illuminated display
Displays information on boiler status
U3
Illuminated display
Displays information on boiler status
D4
Green led
If on, it indicates the system is live
D5
Red led
If on, it indicates a possible fault
