9
INStAllAtION
ments, pipes or power lines
Avoid:
—
installing the device in hallways or passageways
—
any obstacles or barriers that will cause the expelled air to
recirculate
—
locations with aggressive or explosive atmospheres or with
inflammable fluids
—
direct exposure to sunlight and proximity to heat sources
—
humid locations or positions where the unit could come
into contact with water
—
environment containing oil vapours
—
locations with high frequency contamination
9
Avoid placing the unit less than 1 metre away from radio and
video systems.
9
A detachable section cut into the suspended ceiling is re-
quired in order to access the unit.
2.7
Recommended distances
The distances for the device installation and maintenance are
shown in the figure. The indicated spaces are necessary in order
to prevent the airflow from being blocked, as well as to allow
normal cleaning and maintenance operations to be carried out.
CEIlING INStAllAtION
150
10
80
IN tHE CEIlING INStAllAtION
1
false ceiling
150
10
80
1
1
HIGH SPACING DIStANCE
2300
2.8
Installation on old systems or systems in need
of upgrading
When
R
AMS P
is installed on old systems or systems in need
of upgrading, it is recommended to ensure that:
—
the electrical system is compliant with the applicable reg-
ulations and has been installed by qualified professionals
9
In the event of a replacement, the system must be inspected
by the designer or by another competent person, and must
be compliant with the technical requirements, as well as
the current legislations and regulations.
9
The manufacturer shall bear no responsibility for any dam-
ages caused by incorrect system installation.
2.9
Positioning
R
AMS P
is designed for ceiling horizontal or vertical floor in-
stallation and must be fixed to the support wall.
In the ceiling positioning they can be fixed or partially embed-
ded in the false ceiling.
The appliance is designed with fixing brackets:
1
Fixing brackets
30
A
1
30
155
300
Model
100
125
140
template dimensions
A
1204
1530
mm
To access the fixing brackets it is necessary to remove the side
