19
INStAllAtION
2.14
Remote control
Control, setting and programming operations are carried out
with the IR remote control.
The electronics modulates the device operation according to the
temperatures detected by the probes inside the indoor and out-
door units.
Battery insertion
The remote control is powered by two AAA batteries (1.5 V) housed
at the back, under a cover.
Should you notice a poorer reception or if display information
fades out, the batteries must be changed.
To fit or change batteries:
—
remove the cover by pressing it down and lifting it up
—
if present, remove old batteries
—
fit new batteries according to proper polarity
9
Two 1.5V AAA batteries are supplied with the unit for its first
set-up.
9
Never mix and match new and old batteries or different
types of batteries.
9
When you remove the batteries, all settings in the remote
control will be deleted. Fit the new batteries and reprogram.
9
Do not dispose of old batteries in the environment. Always
take them to the suitable containers at points of sale.
function keys
The remote control features a small door in the key area:
DOOR ClOSED
1
Display
2
Smart button
3
Quick function keys
4
On- Off key
1
4
2
3
When the door is closed, you can activate the quick functions,
such as choosing the operating mode and setting the desired
temperature.
9
Ensure that the door is fully closed. If this is not the case, the
external keys will not work.
function keys with door closed
Enables Automatic mode
It switches the device on and off
It activates the Cooling mode
It activates the Heating mode
It activates the Dehumidification mode
It increases or decreases the selected parameter
value
Enables ECO function
Function not available
Select required ventilation speed: minimum,
medium, maximum or automatic
Function not available
