12
R
EMOVAL OF THE
UPS
(
OR
B
ATTERY
B
OX
)
FROM THE PALLET
This chapter describes the operations to prepare the UPS (or Battery Box) for installation.
ATTENTION:
For your safety and that of the product, you must carefully follow the instructions given here below.
BEFORE YOU CARRY OUT THE FOLLOWING SEQUENCE OF OPERATIONS, MAKE SURE THAT THE
UPS IS COMPLETELY SWITCHED OFF AND NOT CONNECTED TO THE MAINS POWER SUPPLY OR TO
ANY LOAD.
1. Cut the straps and open the cardboard box.
2. Remove the packaging and the accessory box located
above the UPS.
3. Remove the cardboard box by sliding it
upwards and remove the corner supports.
4. Remove the protective sack.
5. Remove the 4 fixing brackets of the UPS (or Battery Box) on the pallet; each bracket is fixed to the pallet with 2 screws.
FRONT VIEW
REAR
VIEW
