13
6. Move the brackets upwards and rotate for releasing them from the retaining bushing.
Follow the instructions below to remove the fixing brackets without releasing the UPS front panel (*).
7. Remove the 4 fixing screws of the
frontal wooden beam of the pallet.
8. Remove the wooden beam, pay
attention to holding stable the UPS
above the pallet during this operation.
9. Guide the UPS towards the front of
the pallet; use the pallet as a chute.
10. Carefully, bring the UPS down from
the pallet towards the floor.
(*) If it will be difficult to remove the brackets, unhook the UPS front panel pulling it from the edges; the front panel is hooked
with a system of pins and springs, tools are not needed.
