2322
3
GB
3.
INSTALLATION
3.1
BOILER FIXING
3.2
FUEL SUPPLY
The burner is designed to allow entry of the oil supply pipes on either side.
Depending on the oil supply pipes position (to the right or to the left hand side of the burner) the fixing plate
(1)
and cable clamp
(2)
should be reversed, (see fig. 6).
Fig. 5
D5012
Fig. 4
D5025
■
Put on the flange (1) the screw and two nuts, (see fig. 3).
■
Widen, if necessary, the insulating gasket holes (4), (see fig. 4).
■
Fix the flange (1) to the boiler door (3) using screws (5) and
(if necessary)
the nuts (2) interposing the
insulating gasket (4), (see fig. 2).
■
Open the boiler door, insert the flame tube (6) on the burner blast tube (7) and fix it with the nut (8).
■
After installation ensure that burner is lightly inclined as in fig. 5.
2
1
3
6
4
7
5
Fig. 3
Fig. 2
S7158
8
Boiler door must have a max. thickness
of 180 mm, refractory linig included.
IMPORTANT
D5345
1
1
Fig. 6
2
Содержание Gulliver BLU 3739150
Страница 44: ......