![background image](http://html1.mh-extra.com/html/pioneering-technologies/smartmicro/smartmicro_installation-instructions-manual_1558693001.webp)
NOT DESIGNED AS A REPLACEMENT FOR A SMOKE DETECTOR
IMPORTANT! READ ALL INSTRUCTIONS BEFORE INSTALLATION AND KEEP THIS
MANUAL NEAR THE SMARTMICRO FOR FUTURE REFERENCE.
NOT FOR COMMERCIAL USE. FOR INDOOR USE ONLY.
H. Troubleshooting: Read BEFORE you call for service.
SMART
SMART
MICRO
MICRO
Please review this easy to use “Troubleshooting Check List” for the
most frequently encountered situations.
PROBLEM POSSIBLE CAUSE/SOLUTION
Installation Instructions
Microwave
does not
operate
Panel fuse has blown or circuit breaker has tripped.
Check and/or replace fuse or reset circuit breaker.
Microwave cord/plug not plugged properly into the control box.
Make sure cord plug is plugged tightly into control box.
Control box not plugged properly into power outlet.
Power outage. Check house lights to be sure.
I. Service & Warranty:
Pioneering Technology Corp. warrants that the product is free from
defects in materials and workmanship when operated and maintained
according to the instructions provided for a period of one (1) year from
date of purchase.
This warranty does not cover physical damage caused by improper
installation, misuse, neglect or accident.
This warranty is VOID if this product has been altered or modified in any
way.
For service under this warranty contact your SmartMicro™ distributor or
Pioneering Technology at:
Pioneering Technology Service Dept.
2400 Skymark Ave, Unit 7
Mississauga, Ontario
Canada L4W 5K5
Tel: 1 (800) 433-6026
Email: [email protected]
Microwave Cooking Safety Tips from the NFPA
•
Never leave cooking unattended.
•
Read the manufacturer’s instructions before using a microwave oven.
•
Never use an extension cord because it may overload the circuit and
cause a fire.
•
Use only microwave-safe cookware (containers or dishes).
•
Open microwave food slowly, away from the face. Hot steam
escaping from a container or the food itself can cause burns.
•
Never use aluminum foil or metal objects in a microwave oven.
•
If you have a fire in your microwave, turn it off immediately and keep
the door closed. Never open the door until the fire is completely out.
Have the oven checked and/or serviced before being used again.
Note: National Fire Protection Association (NFPA) does not test, label or
approve any products.
A. Introduction:
This product is designed to help prevent microwave oven fires & false/
nuisance alarms activations.
B. Features:
•
Automatic shut-off
- power to microwave interrupted (shut-off
and reset) .
•
Auto-reset -
power is automatically restored after the area
around the vent has cleared.
•
Easy to install & use -
mount magnetic sensor to microwave
just above exhaust vent slots; plug control box into outlet; plug
microwave into control box.
•
No batteries required
.
THERE ARE NO OTHER WARRANTIES. PIONEERING TECHNOLOGY
CORP. DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESSED
OR IMPLIED. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY HAVE OTHERS WHICH VARY FROM STATE TO
STATE.
EXCEPT AS STATED HEREIN, IN NO EVENT SHALL PIONEERING
TECHNOLOGY CORP. BE LIABLE FOR ANY DAMAGES WHATSO-
EVER WHETHER BASED ON CONTRACT, TORT, WARRANTY OR
OTHER EQUITABLE GROUNDS, INCLUDING, WITHOUT LIMITATION,
OR OTHER PECUNIARY LOSS, ARISING OUT OF THE USE OF OR
INABILITY TO USE THIS PRODUCT, EVEN IF PIONEERING
TECHNOLOGY CORP. HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGE, THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
Pioneering Technology’s entire liability and your exclusive remedy shall be at
Pioneering Technology’s option, either (a) return of the price paid for the product or (b) repair
or replacement of the product that does not meet Pioneering Technology’s Limited Warranty
and which is returned to Pioneering Technology. In no event shall Pioneering Technology’s
liability exceed the purchase price of the product.
C. Power Rating:
120VAC, 60Hz, 15Amps
This product is not designed for use on:
1. Built-in microwaves unless the exhaust vents are exposed.
2. Microwaves with a manual dial-timer.
D. Components:
The SmartMicro™ has two components:
•
Magnetic sensor; and
•
Control box (power supply box).
E508088