English – 3
nano
TM
General Safety Rules
WARNING
Read all safety warnings and instructions. Failure
to follow the warnings and instructions may result
in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS!
Work Area Safety
t
Keep your work area clean and well lit.
Cluttered or
dark areas invite accidents.
t
Do not operate equipment in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust.
Equipment can create
sparks which may ignite the dust or fumes.
t
Keep children and bystanders away while operat-
ing equipment.
Distractions can cause you to lose
control.
Electrical Safety
t
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges, and re-
frigerators.
There is an increased risk of electrical
shock if your body is earthed or grounded.
t
Do not expose equipment to rain or wet condi-
tions.
Water entering equipment will increase the risk
of electrical shock.
t
Do not abuse the cord.
Never use the cord for carry-
ing, pulling, or unplugging the power tool. Keep cord
away from heat, oil, sharp edges, and moving parts.
Damaged or entangled cords increase the risk of
electric shock.
t
If operating equipment in a damp location is un-
avoidable, use a ground fault circuit interrupter
(GFCI) protected supply.
Use of a GFCI reduces the
risk of electric shock.
t
Keep all electrical connections dry and off the
ground.
Do not touch equipment or plugs with wet
hands to reduce the risk of electrical shock.
Personal Safety
t
Stay alert, watch what you are doing, and use
common sense when operating equipment.
Do
not use equipment while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating equipment may result in
serious personal injury.
t
Use personal protective equipment.
Always wear
eye protection. The appropriate use of protective
equipment such as a dust mask, non-skid safety
shoes, a hard hat, and hearing protection will reduce
personal injuries.
t
Do not overreach.
Keep proper footing and balance
at all times. This enables better control of the equip-
ment in unexpected situations.
t
Dress properly.
Do not wear loose clothing or jew-
elry. Keep your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, and long hair
can be caught in moving parts.
Equipment Use and Care
t
Do not force equipment.
Use the correct equipment
for your application. The correct equipment will do the
job better and safer at the rate for which it is designed.
Safety Symbols
In this operator’s manual and on the product, safety symbols and signal words are used to communicate important safety in-
formation. This section is provided to improve understanding of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE indicates information that relates to the protection of property.
This symbol means read the operator’s manual carefully before using the equipment. The operator’s manual contains important
information on the safe and proper operation of the equipment.
This symbol means always wear safety glasses with side shields or goggles when handling or using this equipment to reduce
the risk of eye injury.
This symbol indicates the risk of electrical shock.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
