8 - English
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
NOTE: ILLUSTRATIONS START ON PAGE 9 AFTER FRENCH AND SPANISH
LANGUAGE SECTIONS.
OPERATION
IMPACT TIME
Many variables exist that will cause the maximum torque
to the fastener to vary considerably, including the size and
threading of the fastener, lubrication, material hardness, and
environmental conditions.
NOTE:
Using a universal joint or extension bar may reduce
the fastening force of the impact wrench and require longer
fastening time.
NOTICE:
After the head of a nut or bolt has seated, additional im-
pacting will increase the chance of shearing bolts, nuts,
sockets or tearing into wood.
ELECTRIC BRAKE
The electric brake will stop the socket rotation after the
operator releases the switch trigger.
TROUBLESHOOTING
LED LIGHT FUNCTIONS
TOOL STATUS
LED LIGHT SCENARIO
ACTION REQUIRED
Normal
Solid Light (No Flashes)
No Action Needed
Low Battery
3 Flashes
Replace Battery
Excessive Force
6 Flashes
Wait 5 Seconds
Over Temperature
9 Flashes
Let Tool Cool Off
*More than 9 flashes will result in the need to remove the battery and reinsert a few minutes later.
