Ridder RW140 Скачать руководство пользователя страница 6

Страница: 6 / 52

Safety instructions

•

For a fail-safe function install redundant safety systems to prevent that loads or system parts

fall uncontrolled. Install (if necessary) protection from system parts that move. Obey the

applicable national and/or local standards and guidelines of the related type of operated

system.

•

Use (if applicable) personal protective-equipment for protection which agrees with the different

types of work.

•

Do not let persons and not approved personnel be near controls and systems in operation.

•

Damaged systems must be stopped immediately until they are repaired.

•

Use safety barriers for system parts that move. Refer to the applicable standards and guidelines.

•

The safety distance to the danger zone (if applicable) must agree with applicable standards and

guidelines (for example ISO 13857:2008).

•

Do not operate systems when the motor gearbox (internally and/or externally) is frozen in cold

and moist conditions (for example because of snow or ice).

•

Do not operate systems when persons are in the danger zone and can touch the system.

•

Monitor the danger zone when you work with or near the system.

•

Stop and de-energize systems during maintenance and cleaning work on or near the system.

•

Make sure that there is sufficient space between parts that move and adjacent objects.

•

Stay away from or safety areas where there is a risk to become caught in a system that moves.

•

The torque and the duty cycle of the system must be in the range of the motor gearbox

parameters.

2.3 Residual risks

Automatic controls

The Ridder drive-units are usually used in automatic controlled systems. Persons who do work or

stay near the system must know about that. If persons or their clothes touch the system during

operation, it can be dangerous.

Forces

Ridder cannot be sure that there will be no injury to persons or damage to the system because of

the forces in the systems (in which the drive unit is installed).

If you do not obey the safety instructions that follow it can be

dangerous and cause injury.

Persons can be in danger of life if they touch a system that is in

operation.

Ridder Drive Systems B.V.

+31 (0)341 416 854 -

+31 (0)341 416 611 -

ridder.com

Содержание RW140





















































Результаты поиска

Содержание RW140

Отзывы:

Похожие инструкции для RW140

Бренды по названию

Популярные бренды

Ridder RW140, Руководство по эксплуатации продукта

Результаты поиска

Содержание RW140

Отзывы:

Похожие инструкции для RW140

Бренды по названию

Популярные бренды