Ricoma Quick Start Guide
28
DESIGN SETTINGS
This key is used to customize design settings like the design direction,
rotation angle and frame type.
EMBROIDERY PROGRESS
This key displays the progress of the embroidery job. At 0%,the embroidery
has not yet begun. At 100%, the embroidery is complete.
COLOR SEQUENCE MENU
SPEED
TRIMMING
THREAD BREAK DETECTION
START POINT SETUP
PRODUCTION STATISTICS
TRACING MENU
RETURN TO ORIGIN
Used to select color sequence settings. The left side displays the current
working needle and any additional settings, and right side displays the
upcoming working needle and its additional settings.
These keys are used to increase or decrease the speed of
the embroidery in stitches per minute (spm).
This key is used to command the machine to trim during embroidery.
This key is used to detect thread breaks during embroidery.
This key is used to save the start point, restore the start point or pick
up where you left off.
This key is used to look at production stats that will help guide you in
increasing efficiency such as how many garments you’ve embroidered,
how many thread breaks you’ve gotten, and the total stitches you’ve
embroidered.
Used to trace your design to avoid hitting the hoops and make sure the
design is centered.
This is used to restart the design and return to the design origin back
to its original placement when you need to embroider another one of
the same design.
