Ricoh V-C3 D081, Руководство по обслуживанию на месте

Страница: 622 / 1092

No. Component Function
S41 Duplex Inverter Sensor
Detects the leading edge of the paper at the inverter exit roller
and signals to switch off the reverse trigger roller solenoid to
signal a jam if the paper does not arrive at the prescribed time.
S42 Duplex Entrance Sensor Detects paper jams at the entrance of the duplex unit.
S43
Duplex Transport Sensor
3
Detects the leading edge and trailing edge of each sheet as it
passes from the jogger unit above through the horizontal feed
path of the duplex unit below. Signals a jam if the paper does
not arrive at or reach the sensor location at the prescribed time.
S44
Duplex Transport Sensor
2
Detects the leading edge and trailing edge of each sheet as it
passes from the jogger unit above and into the horizontal feed
path of the duplex unit below. Signals a jam if the paper does
not arrive at or reach the sensor location at the prescribed time.
S45 Duplex Jogger HP Sensor
At power on, detects the actuators on the jogger fences of the
duplex unit, switches off the jogger motor and stops the fences
at their home positions.
S46
Double-Feed Detection
Sensor
Receives the light emitted from the double–feed detection LED
and reflected from the surface of each sheet in the paper path.
Signals an error if the thickness of the paper is not the same as
the previous sheet.
S47
Guide Plate Position
Sensor
Monitors the opened/closed status of the guide plate.
S48 Relay Sensor Detects jams at the top of the vertical paper path.
S49 Registration Sensor
Detects the leading edge of the paper and switches off the
registration motor and stops the registration roller briefly but
long enough to correct buckle the paper.
S50 Paper Exit Sensor
Detects the leading and trailing edge of each sheet at the paper
exit slot to check timing and detect jams.
S51 Bypass Paper Sensor Detects the presence of paper in the bypass tray.
S52 Bypass Paper End Sensor
Signals paper out when the last sheet feeds from the bypass
tray.
S53 Bypass Paper Size Sensor
Reads the positions of the side fences (manually adjusted) to
detect the width of the paper in the bypass tray. (Paper length
is read with pulse counts from the registration sensor.)
1. Appendix: Specifications
44
1