Ricoh V-C3 D081, Руководство по обслуживанию на месте

Страница: 167 / 1092

2. Connect the power supply cord plug into a power outlet.
3. Test the breaker switch [B] (
p.234 "Common Adjustments").
Check for Skew and Correct Side-to-Side Registration
1. Load some B4 paper in Tray 2 of the main machine.
2. Make several prints that will exit to the upper tray.
3. Watch each sheet as it exits the machine to check for the presence of skew, and check that the side-
to-side registration is correct ( p.234 "Common Adjustments").
Proof Tray Auxiliary Plate
1. Install the proof tray auxiliary plate.
• Assemble the top (1) and bottom (2) of the plate [A].
• Set the assembled plate in the center aligned with the diagonal groove at [B].
• The back should be flat against the end fence.
2. When the plate is not being used, open the front door and store the assembled plate at [C] inside the
inner cover.
• The plate should be used when Z-folded paper (all sizes) is output to the proof tray.
• If the plate is not used with Z-folded output, the pages could mix and overlap.
Multi Folding Unit (D454)
165
2