Ricoh V-C3 D081, Руководство по обслуживанию на месте

Страница: 803 / 1092

13 Side2:SepDC [0 to 10/0.1
μ
a]
14 Side2:SepAC [8 to 12/0.1 kV]
275
6
Sp1 FC Bias
Set Bias for Special Paper 1: K. These SPs set the standard values of the electrical charges that
are applied to 1) create bias for image transfer from drum of each color (Y, M, C, K) to the ITB,
2) create bias for image transfer from ITB to paper (PTR), and 3) neutralize the charges on the
both sides of the paper to separate the paper from the ITB (SepDC, SepAC). These settings are
used only for Y, M, C, K when printing on Special Paper 1 in the full-color mode and are applied
only to the image area.
1 ITB:K [0 to 70/0.1 μ a]
2 ITB:M [0 to70/0.1
μ
a]
3 ITB:C [0 to 70/0.1
μ
a]
4 ITB:Y [0 to 70/0.1
μ
a]
13 Side1:PTR [-100 to 0/1 μ a]
14 Side1:SepDC [0 to 10/0.1
μ
a]
15 Side1:SepAC [8 to 12/0.1 kV]
21 Side2:PTR [-100 to 0/1
μ
a]
22 Side2:SepDC [0 to 10/0.1 μ a]
23 Side1:SepAC [8 to 12/0.1 kV]
These SPs set the paper size correction coefficients for Special Paper 1 relative to the settings done with
SP2308 (Set Psize Thresh). All of hese settings:
• Apply to printing on Special Paper 1 in the black-and-white mode
• Apply only to the image area
The title of each SP tells you the side and size where the setting is applied at ITB-to-paper transfer, for
example: "Side1:Size1:PTR" means the setting applies to only the first side of Size 1 when the image is
transferred from belt to paper.
277
1
LEdge Cor:Sp1:K
Group 2000
225
4