Ricoh V-C3 D081, Руководство по обслуживанию на месте

Страница: 296 / 1092

To remove the hopper:
1. Prepare an open space on the floor for the hopper.
2. Remove the screws of the toner hopper [A] ( x3).
3. Place your hands under the left and right corners of the toner hopper and slowly pull it out on its rails
until it stops.
• The hopper can easily slip off its rails!
4. Press the release [B] to drop the support leg [C].
5. Confirm that the support leg is down and locked.
• Always make sure that the support leg is down and locked before you remove the hopper.
6. Lift the toner hopper off its rails and set it on the floor.
• The hopper is heavy, so lift it carefully. Make sure the hopper unit tabs have disengaged
completely from the rails before you try to set the unit on the floor.
7. Push the hopper rails into the machine.
To remove the faceplate
4. Replacement and Adjustments
294
4