Ricoh RDC-5300, Руководство по эксплуатации

Страница: 62 / 134

60
w
Press the ▼ or ▲ button to select
[WHITE BALANCE] and press the ENTER
button.
The setup menu will be displayed.
Note
• To cancel the operation, press the
MENU button to return to the record
menu.
e
Press the
▼
and
▲
buttons to select the
white balance mode ( ).
r
Press the release button to take the
photograph.
When the release button is pressed halfway, the
normal display will appear. Fully press the
release button to take the photograph.
When picture taking is completed, the setup
menu will return.
To check the mode setting, press the ENTER
button to end operation. To cancel, press the
MENU button to return to the recording menu
and then press the MENU button again to exit
the recording menu.
Important
Note
• Even with the same subject, colors may vary due to the weather
conditions and light source.
Note
• In auto mode, subjects lacking in white tones may not achieve an appropriate
white balance. When shooting such subjects, add a white object to the
composition.
• White balance modes can only be set in recording mode and not in playback
mode.
• The flash will not fire in the following white balance modes: daylight,
fluorescent light, tungsten light and cloudy (overcast) mode.
• Enable the keep settings mode to save the white balance mode setting.
See “Keep Settings” (p.104).
M E N U [ R E C O R D ]
R E C O R D I N G M O D E :
W H I T E B A L A N C E : A U T O
+ / – : O F F
F O C U S : A U T O
D A T E I M P R I N T : O F F
R E D E Y E R E D U C T I O N : O F F
M O N O C H R O M E : O F F
I N T E R V A L M O D E : O F F
B A C K : M E N U S E L . : E N T E R
How to cancel the mode
Perform the same operations and use step
e
to select Auto white balance.
W H I T E B A L A N C E
A U T O
C A N C E L : M E N U S E L . : E N T E R
1 2
1 8 0 0 x 1 2 0 0 N