Ricoh PRO C751 Скачать руководство пользователя страница 15

Страница: 15 / 76

Beep Alert

This section describes the different beep patterns that the machine emits to notify users of various events
and conditions.

Beep pattern

Meaning

Cause

Single short beep

Panel/screen input
accepted.

A key on the control or display panels
was pressed.

Short, then long beep

Panel/screen input rejected. An invalid key was pressed on the

control or display panels, or the
entered password was incorrect.

Two long beeps

Machine is ready for use.

The machine has fully warmed up or
has revived from Energy Saver mode
and is ready for use.

Five long beeps repeated
four times.

Soft alert

A paper tray is empty.

Five short beeps repeated
five times.

Strong alert

The machine requires user attention
because paper has jammed, the toner
needs replenishing, or other problems
have occurred.

• You cannot stop the beeping. If covers are opened and closed repeatedly when clearing paper

jams or adding toner, beeping might continue even after the machine has returned to normal status.

• You can specify to enable or disable beep alerts. For details, see Panel Key Sound in "General

Features", Network and System Settings Reference .

Beep Alert

Содержание PRO C751













































































Результаты поиска

Содержание PRO C751

Отзывы:

Похожие инструкции для PRO C751

Бренды по названию

Популярные бренды

Ricoh PRO C751, Руководство по устранению неисправностей

Результаты поиска

Содержание PRO C751

Отзывы:

Похожие инструкции для PRO C751

Бренды по названию

Популярные бренды