Ricoh Pro 1106EX Скачать руководство пользователя страница 226

Страница: 226 / 234

Appendix

206

❖

Front Cover, Front/Back Cover

• If Blank mode is selected, the cover is not be counted as a copy.
• Front and back covers are two-sided copied depending on the settings

made in Display Time in Cover Sheet Tray of User Tools (System Settings).
• At Mode Selected… Depends on the setting done from Cover Sheet

Tray.

• Full Time… Depends on the setting done from Paper Type.

See “Tray Paper Settings”, General Settings Guide.

❖

Designate

• When

[

Combine (1 Sided

→

2 Sided)

]

has been selected, specified pages will al-

ways be copied on the front of copies, as in Chapters mode.

• In “Tray Paper Settings”, if you selected

[

At Mode Selected

]

for

[

Display Time

]

the machine refers to the settings in “Tray Paper Settings” to ascertain
whether the front and back covers are copied one-sided or two-sided. If
you selected

[

Full Time

]

for

[

Display Time

]

, the machine refers to the settings

in “Paper Type” to ascertain whether the front and back covers are copied
one-sided or two-sided. See “Tray Paper Settings”, General Settings
Guide.

• If Blank mode is selected, the designate sheet is not counted as a copy.

❖

Slip sheet

• Tab stock are possible to use as slip sheets.
• If you do not copy onto slip sheets, they are excluded from the number of

copies counted.

Содержание Pro 1106EX











































































































































































































































Результаты поиска

Содержание Pro 1106EX

Отзывы:

Похожие инструкции для Pro 1106EX

Бренды по названию

Популярные бренды

Ricoh Pro 1106EX, Руководство по эксплуатации

Результаты поиска

Содержание Pro 1106EX

Отзывы:

Похожие инструкции для Pro 1106EX

Бренды по названию

Популярные бренды