41
English
User Controls
Projector Status and Control Page
Projector Status: There are 4 status: Standby, Warning up, Lamp On, Power Saving
`
`
and Cooling. Click the Refresh button to refresh the status and control settings.
Auto Power Off: Auto Power Off can be set to Off(0) or 1~120 minutes. See “Auto
`
`
Power Off (min)” function.
Alert Status: There are three error status: Lamp warning, Low lamp life, and
`
`
Temperature warning. Your projector might lock up in protection mode if any of the
alerts is activated. To exit protection mode, click the Clear to clear the Alert Status
before you could Power ON your projector.
Projector Mode: Allows you to select the projector mode, depending on how the
`
`
projector is mounted. There are four projection modes: Front, Front Ceiling, Rear and
Rear Ceiling.See “Ceiling Mount” function.
Input: The Source Select menu allows you to select your projector's input source.
`
`
You can select Computer1/Computer2, S-Video, Video and HDMI.
Color Mode: Select a mode to optimize the display image based on how the projector
`
`
is being used. See “Color Mode” function.
AV Mute: Select On/Off to hide/unhide the
`
`
screen picture.
Aspect Ratio: Allows you to select the aspect ratio to adjust how the image appears.
`
`
Brightness: Select value to adjust the brightness of the image.
`
`
Contrast: Select value to adjust the display contrast.
`
`
Volume: Select the value (0~32) for the audio volume
`
`
Mute: Choose “On” to turn mute on. Choose “Off” to turn mute off.
`
`
Microphone Volume: Select the value (0~32) for the Microphone Volume.
`
`
Click the Auto Adjust button to adjust the settings automatically.
Click the Factory Reset button to restore the factory default settings.
