English
90
LAN Control
Image Setup
Aspect: Switche the aspect ratio of the projected image.
Phase: Adjust the phase of the projected image.
H Position: Adjust the horizontal position of the projected image.
V Position: Adjust the vertical position of the projected image.
Frequency: Adjust the frequency of the projected image.
Freeze: Switches the image freezing function between on and off.
Auto PC Adj.: Implements automatic adjustment by the PC.
V Keystone: Adjust the vertical keystone distortion.
H Keystone: Adjust the horizontal keystone distortion.
Corner correction: Adjust the screen when the linearity is uneven or the
vertical or horizontal curves of the projected image are deformed.
Network Setup
LAN Setup:
If you want to enable the DHCP, select [Obtain the IP address
automatically].
IP address: If no DHCP is used, enter the IP address.
Subnet: If no DHCP is used, enter the subnet.
Gateway: If no DHCP is used, enter the gateway IP address.
DNS: If no DHCP is used, enter the DNS server IP address. Supported
characters: Digits (0-9) .
Apply
Updates the settings.
IPV6 cannot be used
in this device.
After [Reset] is
implemented, [LAN
Settings] will be
restored to factory
defaults
Note
