English
8
Usage Notice
product, ask the service technician to perform safety
checks to verify that the product is in proper operating
condition.
■
Caution-
Do not use the product in a closed installation
location. Do not place the product in a box or in any
other closed installation location. Otherwise it may
overheat, which could result in a risk of fire.
■
Warning- Do not look into the lens or vent when the product
is on. The bright light may damage your eyes. Be
especially careful in an environment with children.
■
Caution-
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
■
Caution-
Do not block the projection light when it is on. If you
do so, the part that is blocking the projection light
may get quite hot and deform, deteriorate or cause a
burn or fire. The reflected light may make the lens hot
and cause a product failure. To temporarily suspend
projection, select the mute function. To suspend
longer, turn off the product.
■
Caution-
Be sure to reserve proper space at the top, sides, and
rear of the shell for ventilation and projector cooling.
The following figure shows minimum distances to
be reserved. If the projector is placed in a cabinet or an
enclosed environment, the requirements for minimum
distances must be satisfied.
≥ 100cm
≥50cm
≥50cm
≥50cm
Air intake
Air intake
Air outlet
Air intake
Air outlet
Air intake
≥ 100cm
≥50cm
≥50cm
≥50cm
Air intake
Air intake
Air outlet
Air intake
Air outlet
Air intake
■
Caution-
Do not block the ventilation holes to prevent
overheating.
Exhaust vent (hot air out)
Air vent
