English
98
Troubleshooting
...
Off
...
Orange
...
Blinks orange (2s)
...
Blinks orange (0.5s)
...
Green
...
Blinks green
...
Red
...
Blinks red
...
Blinks orange (1s)
Problem: LED lights up or blinks
The time marked in
the preceding table
is an LED blinking
interval.
Note
Projector
status
NO.
Detailes
LED indicator
Content (condition, sequence,
check item, etc.)
POWER STATUS TEMP.
Normal
1
AC Off
AC is not connected to the
projector state
2
Standby
AC is connected to the
projector and is in standby
state
3
Standby or
cooling after
power off
The projector is ready for
standby or the projection laser
is cooling down
4
Power on
Power on state
5
Sleep
standby
When powermanagement is
set to ready, enter suspend
from cooling
Abnormal
1
Abnormal
temperature
Automatic shutdown after
abnormal temperature and
enter the standby state after
Warning Cooling
2
Temperature
abnomaly
cooling
When the temperature is
abnormal, it will enter the
warning cooling state
3
Laser error
standby
Automatic shutdown after
Laser error and enter the
standby state after Warning
Cooling
4
Laser error
cooling
When Laser status is error, it
will enter the warning cooling
state
5
Power fail
Main Board error or Panel
error and enter to the standby
6
fan 1 error
(0.5s)
Fan-1 error and enter to the
standby state
7
fan 2 error
(0.5s)
Fan-2 error and enter to the
standby state
8
fan 3 error
(0.5s)
Fan-3 error and enter to the
standby state
9
fan 4 error
(0.5s)
Fan-4 error and enter to the
standby state
10
fan 5 error
(1s)
Fan-5 error and enter to the
standby state
11
fan 6 error
(1s)
Fan-6 error and enter to the
standby state
