English
42
Basic Operations
Input Source Signal Selection
If the input source is a device that connected
to the HDBaseT terminal with a network cable,
choose “HDBaseT”
HDBaseT
If the input source is a device that connected to
the DVI terminal with a DVI cable, choose “DVI”
DVI
If the input source is a computer that connects
to Computer In port with a RGB cable, choose
“Computer”.
Computer
If the input source is a device that connects to the
HDMI 2 In terminal with an HDMI cable, choose
“HDMI 2”.
HDMI 2
If the input source is a device that connects to the
HDMI 1 In terminal with an HDMI cable, choose
“HDMI 1”.
HDMI1
Basic Operations
Press the Input button on the remote control or the control panel
on the rear and choose Computer, HDMI1, HDMI2, HDBaseT, DVI,
Memory Viewer, Network, or USB Display as the input source.
Menu operation
1) Press the Input
Input
Auto
set
Menu
AV
Mute
Picture
ECO
Enter
Computer
Video
Freeze
Aspect
Keystone
Volume
Magnify
Status
button on the remote control to enter the input
source menu.
2) Press
buttons to choose Computer, HDMI1, HDMI2, HDBaseT,
DVI, Memory Viewer, Network, or USB Display and press Enter
to select the input source.
You can also
change the input
source by direct keys
on the remote control.
Note
If the input source is a device that connects to the
USB terminal, choose Memory Viewer.
To use Memory Viewer, see P79 for instruction.
Memory Viewer
Computer
HDMI 1
HDBaseT
DVI
Memory Viewer
USB Display
Memory Viewer
HDMI 2
√
Network
