Ricoh P C200W Скачать руководство пользователя страница 150

Страница: 150 / 152

Notices

150

Federal Communications Commission (FCC) compliance

information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended

cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications

could void the user's authority to operate this equipment.

Note:

To assure compliance with FCC regulations on electromagnetic interference for a Class B computing

device, use a properly shielded and grounded cable. Use of a substitute cable not properly shielded and

grounded may result in a violation of FCC regulations.

Any questions regarding this compliance information statement should be directed to:
Ricoh USA, Inc. (Regional HQ)

300 Eagleview Boulevard, Suite 200 Exton, PA 19341, U.S.A.

610-296-8000

Innovation, Science and Economic Development Canada

compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard

ICES-003.

Avis de conformit

aux normes de l

’

Innovation, Sciences

et D

veloppement

conomique Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux

équipements pouvant causer des interférences NMB-003.

Содержание P C200W

























































































































































Результаты поиска

Содержание P C200W

Отзывы:

Похожие инструкции для P C200W

Бренды по названию

Популярные бренды

Ricoh P C200W, Руководство пользователя

Результаты поиска

Содержание P C200W

Отзывы:

Похожие инструкции для P C200W

Бренды по названию

Популярные бренды