T
echnical
B
ulletin
PAGE: 47/66
Reissued: 8-Apr-05
Model:
Martini-P1
Date:
2-Mar-05
No.:
RG126002a
Attaching the Interposer Tray
1. If you install the cover interposer tray on the B674 finisher, install the spacer [A]. You
will hear a click when it is installed correctly.
NOTE:
If you install the cover interposer tray on the B706, do not install this spacer.
This spacer is for the B674 installation only.
2. Lift the cover interposer tray, and align the keyholes [B] with the shoulder screws [C].
Then move the cover interposer down onto the screws.
3. Attach the cover interposer with the screw [D] (1 screw, M3 x 6).
IMPORTANT
•
If you are installing the cover interposer tray on the B674, skip the next section and go
directly to “Attaching the Finisher to the Machine” on page 50.
•
If you are installing the cover interposer tray on the B706, go to the next section, install
the corner plates on the B706, then go to “Attaching the Finisher to the Machine” on
page 50.
B470I004.WMF
[A]
[B]
[C]
[D]
Booklet Finisher
B674 Only
