Ricoh IM 550 Series, Руководство пользователя, Страница: 292 / 344

When Paper or an Original Is Jammed
Remove the jammed sheet by following the procedure described in the animated illustration displayed
on the control panel. If paper jams occur frequently, check the condition of the paper and the settings in
[Tray Paper Settings].
Be careful not to rip the jammed paper and leave small pieces inside the machine when removing. Hold
on the left and right edges of the paper firmly and apply force evenly to pull out the paper.
• There are highly-heated parts inside the machine. When removing misfed paper, do not touch
areas other than those specified in this manual. Touching those areas can result in burns.
• When replacing paper or removing jammed paper, make sure not to trap or injure your fingers.
• When replacing paper or removing jammed paper, close the front cover and do these tasks
one tray at a time.
• Close all the paper trays before opening the front cover to remove jammed paper or replace
supplies.
• Do not turn off the power of the machine when removing the jammed paper. If you turn off the
power, the specified settings values are reset.
• Only perform the operation described in the animated illustration. Failure to do so may degrade
the print quality or cause a malfunction.
1. Follow the procedure described in the animated illustration to remove the jammed paper.
EAT776
2. Close all covers that have been opened.
• If the jammed paper was torn apart while removing it, check that all pieces are accounted for.
• If paper becomes trapped between the tray and the machine while removing jammed paper, pull
out the tray completely and then remove the paper.
9. Troubleshooting
290