Ricoh IM 550 Series, Руководство пользователя, Страница: 279 / 344

Message Cause Solution and reference
"Clean the scanning glass.
(Located next to the
exposure glass.)" The scanning glass
or guide plate of
the ADF is dirty. Clean the scanning glass or guide plate.
See "Cleaning the Machine", User Guide (Full
Version).
"Firmware update will
start. Press [OK]. It will
start automatically after
30 seconds." A firmware update
is available, and
the machine is
about to perform
an update. It is recommended to apply the update, but you
can stop the updating process by pressing [Stop]
within 30 seconds after the message is displayed.
Do not turn off the power of the machine while the
updating process is in progress.
"Internal cooling fan is
active." The fan installed in
the vent for
cooling the interior
of the machine
became active
after a large
number of pages
has been printed. You may hear a rotating noise while the fan is
active, but you can continue using the machine as
usual.
"Output Tray is full.
Remove paper." The output tray is
full. Remove the paper from the output tray.
"Problems with the wireless
board. Please call
service." The Wireless LAN
board can be
accessed, but an
error has been
detected. Turn off the power of the machine, check that the
Wireless LAN board is correctly installed in the
machine, and then turn on the power.
page 9 "Turning On and Off the Power"
If the message persists even after you have turned
the power off and then on, consider repairing the
machine.
When Other Messages Appear
277