2. Service Program Mode Table
No.
Mode
Defaults
Data
11*
(NOTE 2)
All Indicators On
10
10: OFF
11: All the indicators on the Operation
Panel turn on.
12
Misfeed Detection Off
10
10: OFF
11: Copies are made without misfeed detection.
13*
Exposure Lamp Off
10
10: OFF
11: The exposure lamp is off in Free Run mode.
14
Auto Reset On/Off
10
10: Enables the Auto Reset.
11: Disables the Auto Reset.
15
Auto Reset Time
10
10: 1 minute
11: 3 minutes
16
Copy Counter Count
Up/Down
10
10: Up
11: Down
17
Auto Cassette Shift
11
10: The copier automatically to
the other cassette for the same size/direction
when paper runs out.
11: OFF
19
ADS Priority
11
10: The copier defaults to ADS when the main
switch is turned on.
11: Manual
24*
Erase Lamp Forced On
(NOTE 3)
10
10: OFF
11: The erase lamp is forced to turn on.
28
Sorter Operation
10
10: No sorter
11: The sorter is attached.
30
Toner Supply Mode
10
10: P-MODE (Detect Supply Mode)
11: C-MODE (Fixed Supply Mode)
33*
ID Sensor Bias (Color)
(NOTE 6)
10
10: Normal (590 volts)
11: High (620 volts)
34*
Image Bias Up
10
10: Normal
11: The Development Bias for the
copy image is increased by +90V.
54
ID Sensor LED On
10
10: OFF
11: The LED of the ID sensor turns on to allow
Vsg to be adjusted to 4.0
±
0.2 V using VR101
on the main board.
57
Buzzer On/Off
10
10: ON
11: OFF
58*
Exposure Lamp Forced On
(NOTE 3)
10
10: OFF
11: The exposure lamp turns on even if the copier
is not working.
63*
Toner Forced Supply
10
10: OFF
11: The toner supply clutch turns on for 30
seconds if Vsp > 0.5 volts. The clutch can be
turned off by pressing the "0" key.
71
Sorter Bin Capacity
12
11: 10 Bins
12: 20 Bins
83*
Charge Corona Forced On
(NOTE 3)
10
10: OFF
11: The charge corona is forced on.
84*
T/PCC Corona Forced On
(NOTE 3)
10
10: OFF
11: The T/PCC corona is forced on.
85*
Separation Corona Forced
On
(NOTE 3)
10
10: OFF
11: The separation corona is forced on.
86*
QL/PTL Lamp Forced On
(NOTE 3)
10
10: OFF
11: The QL/PTL lamp is forced on.
- 94 -
Содержание FT5034
