Printing from Memory Lock
If the Receive File indicator is blinking, a message has been stored using
Memory Lock. Print it using the following procedure.
1. Function 5 and 6.
2. Input the Memory Lock ID.
Example: 4 6 3 3 from the ten key pad.
3. Start.
Note: If the Receive File indicator is blinking, an incoming fax message has
been stored in the memory using the Memory Lock feature or
Confidential Reception feature.
To print the message using the Confidential Reception, see page 96.
List of Special
Terminals
(Function 81)
Memory Lock On/Off
(Function 62)
Lock messages from
Special Terminals, or
Print messages from
Special Terminals
(Function 63)
Result
Empty
On
Either
All messages are
locked in memory.
Empty/Not empty
Off
Either
No messages are
locked in memory.
Not empty
On
Listed
Only messages from
Special Terminals are
locked in memory.
Not empty
On
Non-listed
All messages are
locked in memory
except those from
Special Terminals.
PRT MEM. LOCK ID SETTING
MEMORY LOCK ID: _
NO TO CANCEL
PRT MEM. LOCK PRESS START
MEMORY LOCK ID:
....
RECEPTION
ADVANCED FEATURES
102
