4800AB(H) - User parameter switch 11 (SWUSR_0B)
Bit 0: Transfer request using DTMF tone signals 0: Not accepted, 1: Accepted
Bit 1: Method of transmitting numbers after the "Tone" mark over an ISDN line
0: UUI, 1: Tone
Bits 2 to 5: Not used
Bit 6: Printout of messages received while acting as a forwarding station 0: Off, 1: On
Bit 7: Polling Standby duration
0: Once, 1: No limit
4800AC(H) - User parameter switch 12 (SWUSR_0C)
Bits 0 and 1: Not used
Bit 2: Toner saving mode
0: Disabled, 1: Enabled
Bits 3 and 4: Printout image density (Fax mode)
Bit 4 3 Setting
0 0 Normal
0 1 Lighten
1 0 Darken
1 1 Not used
Bits 5 to 6: Not used
Bit 7: Copy operation
0: Possible, 1: Prohibited
4800AD(H) - PSTN access method (SWUSR_0D)
Bits 0 and 1: PSTN access method from behind a PABX
Bit 1 0 Setting
0 0 PSTN
0 1 Loop start
1 0 Ground start
1 1 Flash start
4800B8(H) - User function 62 settings (SWUSR_18)
Bits 0 and 1: File retention time
Bit 1 0 Setting
0 0 Disabled
0 1 24 hours
1 0 Disabled
1 1 72 hours
Bits 2 to 7: Not used
4800B9(H) - User function 62 settings (SWUSR_19)
Bit 0: Night timer
0: Disabled, 1: Enabled
Bits 1 to 3: Not used
Bit 4: RDS operation
0: Not acceptable
1: Acceptable for the limit specified by
system switch 03
Bits 5 and 6: Not used
Bit 7: Daylight saving time
0: Disabled, 1: Enabled
4800BA(H) - User function 62 settings (SWUSR_1A)
Bit 0: Not used
Bit 1: Dialing type 0: Pulse dialing (10 pps), 1: Tone (DTMF) dialing
Bits 2 to 7: Not used
Ser
v
ice
T
abl
es
December 21st, 1995
SERVICE TABLES AND PROCEDURES
SERVICE RAM ADDRESSES
4-89
