Ricoh AP610N - Aficio B/W Laser Printer Скачать руководство пользователя страница 84

Страница: 84 / 124

Troubleshooting

SC2001

An error has occurred in the
resident font RAM.

Turn the power off, and then on. If the
message appears again, contact your
sales or service representative.

SD authenticatn.

failed

Authentication from the SD
card has failed.

Turn the power off, and then on. If the
message appears again, contact your
sales or service representative.

Setting change

in process

During offline applications, set-
ting change is currently in pro-
cess.

No action required.

SSID not entered

When pressing View to confirm
an ID, this message indicates
no ID has been entered.

Enter requested ID.

Supply order

failed

Supply order has failed.

The use is required to reset the job.

Toner is almost

empty

The toner is almost run out.

Prepare a new toner cartridge. If the
Image Density gets too light, replace
the toner cartridge with a new one.

See

p.40 “Replacing the Toner Car-

tridge”

Update Mode Err.

Power Off On

The printer has failed to start
updating data.

Turn the printer OFF and then back to
ON.

Waiting...

The printer is waiting for the
next print job.

Wait a while.

Warming up...

The printer is warming up or
toner is being supplied.

Wait until the panel display change
the

[

Ready

]

Messages/Second

messages

Description

Solution

Содержание AP610N - Aficio B/W Laser Printer





























































































































Результаты поиска

Содержание AP610N - Aficio B/W Laser Printer

Отзывы:

Похожие инструкции для AP610N - Aficio B/W Laser Printer

Бренды по названию

Популярные бренды

Ricoh AP610N - Aficio B/W Laser Printer, Руководство по обслуживанию

Результаты поиска

Содержание AP610N - Aficio B/W Laser Printer

Отзывы:

Похожие инструкции для AP610N - Aficio B/W Laser Printer

Бренды по названию

Популярные бренды