Ricoh AP305, Руководство по эксплуатации

Страница: 76 / 156

Paper and Other Media
46
5
❖
❖ ❖
❖
Thick Paper
• If you print on paper heavier than 105 g/m
2
(28 lb), use the bypass tray.
The bypass tray can hold paper up to 157 g/m
2
(42 lb) in weight. The print
quality on paper that is thicker cannot be guaranteed.
• The bypass tray can hold up to 25 sheets.
Note
❒
The number of sheets to be set may vary depending on the paper thick-
ness and paper type.
• When printing on thick paper, you should select the thick paper mode
with the printer driver.
❖
❖ ❖
❖
Adhesive labels
• When printing on adhesive labels, use the bypass tray.
• Load adhesive labels into the tray with the print side down.
• Remove any unused adhesive labels from the tray after you are finished
printing. Leaving them in the tray can cause them to curl.
• When printing on adhesive labels, you should select the plain paper mode
with the printer driver.
• The bypass tray can hold up to 40 adhesive labels.
Note
❒
The number of sheets to be set may vary depending on the paper thick-
ness and paper type.
TFWY060E