Ricoh AP-P2 G188, Руководство по обслуживанию на месте

Страница: 594 / 682

008
POP to SMTP Waiting [0 to 10000 / 300 / 1]
This SP sets the amount of time to allow for the connection to the SMTP server after the
transmission has connected to the POP server and been certified during the execution of POP
Before SMTP.
009
Mail Receive Protocol
[1 to 3 / 1 / 1]
0: No receiving, 1: POP3 protocol
2: IMAP4 protocol, 3: SMTP protocol
This SP specifies a protocol for the mail reception or switches off receiving.
013
POP3/IMAP4 Auth.
[0 to 2 / 0 / 1]
0: Automatic, 1: No encryption done, 2:
Encryption done
This SP specifies whether password encryption is done for POP3/IMAP4 certification.
014
POP3 Srv Port No [1 to 65535 / 110 / 1]
This SP sets the number of the POP3 server port.
015
IMAP4 Srv Port No [1 to 65535 / 143 / 1]
This SP sets the number of the IMAP4 server port.
016
SMTP5 Rcv Port No [1 to 65535 / 25 / 1]
This SP sets the number of the port that receives SMTP mail.
017
Mail Rx Interval [2 to 1440 / 15 / 1 min.]
This SP sets the timing for mail received at regular intervals.
Note: Setting this SP to "0" switches off receiving mail at timed intervals.
019
Mail Keep Setting.
[0 to 2 / 0 / 1]
0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors
during receiving
This SP setting determines whether received mail is stored on the server.
8. Appendix: SP Mode Tables
336
8