Ricoh AP-P2 G188, Руководство по обслуживанию на месте

Страница: 413 / 682

1106
[Fusing Temperature Display] Fusing Temperature Display (Heating or Pressure)
Displays the current temperature of the heating and pressure rollers.
001 Fusing: Center -
[–20 to 250 / 0 / 1 deg/step]
The heating roller has two lamps. One heats the
center of the heating roller and the other heats both
ends of the heating roller.
002 Fusing: Ends - [–10 to 250 / 0 / 1 deg/step]
The heating roller has two lamps. One heat s the
center of the heating roller and the other heats both
ends of the heating roller.
003 Pressure -
1108
[Forced Ready Setting]
Japan use only
001 ON/OFF *ENG
[0 or 1 / 0 / 1 ]
0: OFF, 1: ON
002 Target Voltage Ratio *ENG [85 to 115 / 92 / 1 %/step]
003 Measured Voltage Ratio *ENG [70 to 120 / 100 / 1 %/step]
005 Temp: Threshold *ENG [10 to 32 / 17 / 1 deg/step]
006 Auto Off Timer *ENG [0 to 255 / 0 / 1 min/step]
007 Time *ENG [7 to 60 / P2c: 14.0, P2d: 24.0 / 0.1 sec/step]
008 10s Forced Ready ON/OFF *ENG
[0 or 1 / 1 / 1]
0: OFF, 1: ON
009 10s Forced Ready Time *ENG [0 to 20 / 9.0 / 0.1 sec/step]
1109 [Fusing Nip Band Check]
001 Execute -
[0 or 1 / 0 / 1]
Executes the nip band measurement between
heating roller and pressure roller.
If the nip band width is not 8 mm, and fusing is
not good, replace the pressure roller or install a
new fusing unit.
Engine Service Mode
155
8