Ricoh AFICIO MP 6001, Руководство по обслуживанию

Страница: 1047 / 1351

Error Codes
D418 34 SM
Code Meaning Suggested Cause/Action
6-05
G3 ECM - facsimile data
frame not received within
18 s of CFR, but there
was no line fail
ƒ
Check the line connection.
ƒ
Check connections from the NCU to the FCU.
ƒ
Check for a bad line or defective remote
terminal.
ƒ
Replace the FCU or NCU.
ƒ
Try adjusting the rx cable equalizer
Cross reference
ƒ
Rx cable equalizer - G3 Switch 07 (PSTN)
6-06
G3 ECM -
coding/decoding error
ƒ
Defective FCU.
ƒ
The other terminal may be defective.
6-08
G3 ECM - PIP/PIN
received in reply to
PPS.NULL
ƒ
The other end pressed Stop during
communication.
ƒ
The other terminal may be defective.
6-09 G3 ECM - ERR received
ƒ
Check for a noisy line.
ƒ
Adjust the tx levels of the communicating
machines.
ƒ
See code 6-05.
6-10
G3 ECM - error frames
still received at the other
end after all
communication attempts
at 2400 bps
ƒ
Check for line noise.
ƒ
Adjust the tx level (use NCU parameter 01 or
the dedicated tx parameter for that address).
ƒ
Check the line connection.
ƒ
Defective remote terminal.
6-21
V.21 flag detected during
high speed modem
communication
ƒ
The other terminal may be defective or
incompatible.
6-22
The machine resets the
sequence because of an
abnormal handshake in
the V.34 control channel
ƒ
Check for line noise.
ƒ
If the same error occurs frequently, replace the
FCU.
ƒ
Defective remote terminal.
6-99 V.21 signal not stopped
ƒ
Replace the FCU.