Ricoh AFICIO MP 6001, Руководство по обслуживанию

Страница: 323 / 1351

Copy Image Adjustments: Printing/Scanning
D062/D063/D065/D066 4-136 SM
Registration Buckle Adjustment
When the customer is using special paper, buckle adjustment may be required if paper
feed problems arise.
ƒ
If the buckle is too large, this can cause wrinkling, creasing, or jams caused by sheets
overtaking the sheets ahead of them in the paper path.
ƒ
If the buckle is too small, this can cause jams at the registration roller or skew during
paper feed.
1. Enter the SP mode.
2. Open SP1003.
ƒ
To prevent wrinkling, creasing, or jams, set a smaller value.
ƒ
To prevent jams at the registration roller or to eliminate skew, set a larger value.
SP1003-001 Registration Buckle Adjustment – Tray, LCT
SP1003-002 Registration Buckle Adjustment – Duplex Tray
SP1003-003 Registration Buckle Adjustment – Bypass Tray
Adjustment range -9 mm
¤
+9 mm (small
¤
large buckle)
Initial value 0 mm (Buckle = 10 mm)
4.14.2 IMAGE ADJUSTMENTS: SCANNING
Before doing the following scanner adjustments, perform or check the printing
registration/side-to-side adjustment and the blank margin adjustment.
ƒ
Use an S-5-S test chart to perform the following adjustments.
Registration: Platen Mode