Ricoh AFICIO MP 6001, Руководство по обслуживанию

Страница: 1056 / 1351

Error Codes
SM 43 D418
Fax Op
tion
Ty
pe 9
001
D41
8
Code Meaning Suggested Cause/Action
ƒ Add optional page memory.
22-01
Memory overflow while
receiving
ƒ Wait for the files in the queue to be sent.
ƒ Delete unnecessary files from memory.
ƒ Transfer the substitute reception files to
another fax machine, if the machine’s printer is
busy or out of order.
ƒ Add an optional SAF memory card or hard
disk.
22-02
Tx or rx job stalled due to
line disconnection at the
other end
ƒ The job started normally but did not finish
normally; data may or may not have been
received fully.
ƒ Restart the machine.
22-04
The machine cannot
store received data in the
SAF
ƒ Update the ROM
ƒ
Replace the FCU.
22-05
No G3 parameter
confirmation answer
ƒ Defective FCU board or firmware.
23-00
Data read timeout during
construction
ƒ
Restart the machine.
ƒ Replace the FCU
25-00
The machine software
resets itself after a fatal
transmission error
occurred
ƒ Update the ROM
ƒ
Replace the FCU.
31-21 LAN Fax Error
• It was cancelled received LAN Fax images
during store the image to SAF of FCU.
•
The LAN Fax transmission of a message was
cancelled by the LAN Fax driver.
F0-xx V.34 modem error ƒ Replace the FCU.
F6-xx SG3-V34 modem error
ƒ Update the SG3-V34 modem ROM.
ƒ Replace the SG3-V34 board.
ƒ Check for line noise or other line problems.
ƒ Try communicating another V.8/V.34 fax.
⇒
Rev. 10/05/2009