Ricoh AFICIO MP 6001, Руководство по обслуживанию

Страница: 1045 / 1351

Error Codes
D418 32 SM
Code Meaning Suggested Cause/Action
2-23
JBIG compression or
reconstruction error
ƒ
Turn off the machine, then turn it back on.
ƒ
Replace the EXFUNC board if the error is
frequent.
2-24 JBIG ASIC error
ƒ
Turn off the machine, then turn it back on.
ƒ
Replace the EXFUNC board if the error is
frequent.
2-25
JBIG data reconstruction
error (BIH error)
2-26
JBIG data reconstruction
error (Float marker error)
2-27
JBIG data reconstruction
error (End marker error)
2-28
JBIG data reconstruction
error (Timeout)
ƒ
JBIG data error
ƒ
Check the sender’s JBIG function.
ƒ
Update the MBU ROM.
2-29
JBIG trailing edge maker
error
ƒ
FCU defective
ƒ
Check the destination device.
2-50
The machine resets itself
for a fatal FCU system
error
ƒ
If this is frequent, update the ROM, or replace
the FCU.
2-51
The machine resets itself
because of a fatal
communication error
ƒ
If this is frequent, update the ROM, or replace
the FCU.
2-53
Snd msg() in the manual
task is an error because
the mailbox for the
operation task is full.
ƒ
The user did the same operation many times,
and this gave too much load to the machine.
4-01 Line current was cut
ƒ
Check the line connector.
ƒ
Check the connection between FCU and NCU.
ƒ
Check for line problems.