2 SafeCom Go Ricoh
D60703-16
45
2.9
All printing through SafeCom
Follow the steps below to restrict printing to SafeCom.
1.
Open the printer‘s web page by entering its IP address in a web browser.
2.
Click
Login
and supply the user name (admin) and password (blank).
3.
Click
Configuration
on the menu.
4.
Under
Security
click
Access Control
.
5.
Enter the
IP Address
of the SafeCom server as both the start and end
point of the Access Control Range.
6.
Click
OK
.
You may also need to disable selected network printing protocols, such as the
Internet Printing Protocol (IPP).
7.
Under
Network
click the protocols you want to disable.
2.10
Install SafeCom Go Ricoh via web page
Before proceeding, check that the device_software folder (2.8.1) contains the
Ricoh type specific subfolders, /ricoh_deploy_files_type_?
Type C, F, I, J, L and N:
1.
Open a web browser and enter the printer‘s address.
Use of JavaScript (Active Scripting) must be enabled.
2.
Click
Login
and enter
Login User Name
(admin) and
Login Password
(by
default there is no password) and then click
Login
.
3.
Click
Configuration
on the left menu.
4.
Under
Extended Feature Settings
click
Install
.
5.
Select
Local File
and click
Browse…
to locate the Ricoh type specific
subfolders, /ricoh_deploy_files_type_? and select the
nnnxxx_servlet.zip file. Click
Open
.
6.
Click
Display Extended Feature List
.
7.
Leave
Install to
as is.
8.
In
Auto Start
click
On
.
9.
On the
Extended Feature List
click
RicohServlet
.
10. Click
Install
.
11. On the
Confirm
web page click
OK
.
Install SafeCom Go (SafeCom Go Xlet):
12. Select
Local File
and click
Browse…
to locate the Ricoh type specific
subfolders, /ricoh_deploy_files_type_? and select the
nnnxxx_xlet.zip file. Click
Open
.
13. Click
Display Extended Feature List
.
14. Leave
Install to
as is.
15. In
Auto Start
click
On
.
16. On the
Extended Feature List
click
SafeCom Go
.
17. Click
Install
.
18. On the
Confirm
web page click
OK
.
19. Restart the printer.
