2 SafeCom Go Ricoh
D60703-16
35
If the SafeCom server has multiple IP addresses there will be an entry
for each. If the SafeCom server is clustered you must ensure that it is
only the entry matching the IP address of the virtual server and not
the nodes.
In a multi server solution click
Move up
and
Move down
to prioritize
the order in which the servers are contacted in case the first one on
the list becomes unavailable.
If the device is added via
SafeCom Administrator
the list of SafeCom
servers will include the list of prioritized failover servers. For
additional information about failover servers refer to
SafeCom G3
Administrator’s Manual
D60603
If broadcasting fails you may have to directly enter the IP address in
Add server
and click
Add
.
4.
Click
Apply
.
Note:
After you click
Apply,
it takes one minute before the new
SafeCom Server settings take effect. Wait, otherwise there may be a
login error at the printer.
2.8.3
Resend configuration
If a device added in the SafeCom Administrator is not configured correctly, or if
the device must be reconfigured to a different server, it is possible to resend
configuration details (Server address and Group name) to the device.
1.
Browse to
Devices
in the
SafeCom Administrator
.
2.
Right-click the device and click
Resend configuration
.
The configuration details are now sent to the device and the configuration is
successful when
Server is reconfigured
appears.
Note:
The Resend configuration functionality does not work with devices that
are SafeCom enabled via the device server.
2.8.4
Register device
1.
Open the
Register
web page.
2.
Enter the
User logon
and
PIN code
of a user with Technician or
Administrator rights. The user must have a PIN code.
3.
Click
Register
.
Once the device is registered it appears in
SafeCom Administrator
. The device
can also be registered with the SafeCom solution when:
Using the
Add device
function in
SafeCom Administrator
.
Login at the device if the user has Technician or Administrator rights.
