2 SafeCom Go Ricoh
D60703-16
43
2.8.15
Enable single sign-on for Nuance DigiDocFlow
1.
Open the
Advanced
web page (2.7.10).
2.
Enter
Computer IP address
and
Port
(default 21) of the computer hosting
the Nuance DigiDocFlow solution.
3.
Enter
User name
and
Password
required to access the Nuance
DigiDocFlow solution. The
External authentication
section is only used
for NSi AutoStore (2.8.15). Leave
Enable
unchecked.
4.
Click
Apply
.
2.8.16
Enable single sign-on for NSi AutoStore
From SafeCom obtain the file scNotifyExtAuth.dll.
From NSi AutoStore obtain the client
2
package that contains ASEQAT.exe.
Note:
Both SafeCom server and AutoStore MUST be in the same domain
3
.
SafeCom service MUST be started by a user with remote access rights on the
AutoStore server.
The steps below need to be repeated on each SafeCom server:
1.
Run the ASEQAT.exe as administrator and enter the IP address of the
AutoStore Server. After installation you should see a new service called
ASEQAT
.
2.
Stop the
SafeCom Service
and copy the scNotifyExtAuth.dll into the
SafeCom installation folder.
3.
Right-click
SafeCom Service
and click
Properties
.
4.
Click
Log on
tab and click
This account
. Enter the name and password of
an account that has remote access rights on the AutoStore server.
5.
Click
OK
.
6.
Restart the
SafeCom Service.
Note:
The SafeCom Service loads the IP address of the AutoStore server when
it is started. This implies that a change of the AutoStore server’s IP address
should be followed by a restart of the SafeCom Service.
The steps below need to be performed on the Ricoh device:
1.
Increase the
Heap Size
on the Ricoh device to about 24 MB (2.3).
2.
Open the
Advanced
web page (2.7.10).
3.
Check
Enable
under
External authentication
. Leave all other fields at
their default.
4.
Click
Apply
.
2
The client package is generic in nature, but is most likely known as ‖AutoStore
EquiTrac Client‖.
3
At this point in time no testing has been performed with trusted domains.
