Ricoh Aficio BP20N, Руководство по обслуживанию

Страница: 57 / 144

FUSING UNIT
SM 3-21 G144/G145
R
ep
lac
em
en
t
Adjus
tm
ent
Reassembling the Fusing Unit
The 4 x stripper pawls must be put in the correct position before you can
reassemble the fusing unit. Perform the following procedure before you put the
fusing unit back to the fusing unit assembly.
1. Snap the 4 x stripper pawls [A] out of the left and right side stripper pawl holder
slots (shown in white circles below).
2. Place the top part of the fusing unit onto the bottom part of the fusing unit.
3. Place the 4 x stripper pawls [A] back into the stripper pawl holder slots (shown
with two white arrows in the illustration below).
4. Push the sides of the stripper pawls securely into the stripper pawl holder slots.
5. Reassemble the rest of the fusing unit and set it back into the machine.
G144R901.TIF
G144R902.TIF
[A]
[A]