Ricoh Aficio BP20N, Руководство по обслуживанию

Страница: 116 / 144

MACHINE OVERVIEW
G144/G145 6-4 SM
Toner Save Button
This LED goes on and the toner save mode is enabled when you press the
cancel button for 0.5 sec. The LED goes off and toner save mode is disabled
when you press the cancel button again.
On Line/Error Button and Toner Save Button
The machine experiences internal problems if On Line/Error and Toner Save
button LEDs blink at the same time.
Cancel Button
The cancel button provides the following functions:
1.
Print demo page: In Ready mode, press and hold this button for about 2
seconds, until all LEDs blink slowly. Then release the button.
2.
Print configuration page: In Ready mode, press and hold this button for about 6
seconds, until all LEDs blink quickly. Then release the button.
3.
Clean inside of the printer: In Ready mode press and hold this button for about
10 seconds, until all LEDs turn on. Release the button. The machine prints one
cleaning sheet after this procedure.
4.
Cancel a print job: Press this button during printing. The On Line/Error LED
blinks while the print job is cleared from both the printer and the computer.
Then the machine goes back Ready mode. This may take some time (30
seconds or more), depending on the size of the print job. You cannot perform
this procedure in Manual Feed mode.
5. Toner save mode on/off: In Ready mode, press this button to turn the Toner
Save mode on or off (about 0.5sec).