Ricoh Aficio BP20N Скачать руководство пользователя страница 70

Страница: 70 / 249

SING

RINT

ATERIALS

Printing on Labels

Open the Multi-Purpose Tray and the rear output tray.

Load labels

with the print side up

Guidelines

• Only use labels recommended for laser printers.
• Verify that the labels’ adhesive material can tolerate fusing

temperature of 205°C (400°F) for 0.1 second.

• Make sure that there is no exposed adhesive material

between the labels. Exposed areas can cause labels to peel

off during printing, which can cause paper jams. Exposed

adhesive can also cause damage to printer components.

• Do not feed a sheet of labels through the printer more than

once. The adhesive backing is designed for one pass through

the printer.

• Do not use labels that are separating from the backing sheet

or are wrinkled, bubbled, or otherwise damaged.

Содержание Aficio BP20N


























































































































































































































































Результаты поиска

Содержание Aficio BP20N

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Aficio BP20N, Руководство пользователя

Результаты поиска

Содержание Aficio BP20N

Отзывы:

Бренды по названию

Популярные бренды