Ricoh Aficio BP20N, Руководство пользователя

Страница: 192 / 249

Page 2-6 System Administration Guide
Pr
int Dr
iv
e
r I
ns
tall
ati
on
for
Ne
twor
k
e
d P
rint
er
s
Windows 2000 (TCP/IP)
NOTE: Windows 2000 supports printing via TCP/IP as standard when TCP/IP is
installed on a Windows 2000 Workstation.
Use the Add Printer Wizard to add the
DSm520pf/AC122/AC205
or BP20N to the network.
¾
Select [Start] , select [Settings] , and then select [Printers] .
Double-click on the [Add Printer] icon to display the Add Printer Wizard.
¾
Select [Local Printer], uncheck the box labelled [Automatically detect and install my
Plug and Play printer.] and then select [Next] to display the dialog box listing available
ports.
¾
Select [Create a new port] to display the Printer Ports dialog box.
Select [Standard TCP/IP Port] and select [Next] to display the Add Standard TCP/IP Port
dialog box.
Enter the IP Address of the printer in the [Name or address of printer] field (you can
optionally enter a friendly name for the printer port you are creating or use the default
name created). Then select
[Next] to continue.
If the network printer settings are not automatically detected, click on the [Custom] button
to setup the network printer port settings.
It is recommended that you select [RAW] as the Print Protocol.
If you prefer to use LPR:
Select [LPR] as the Print Protocol.
Enter [lp] (in lower case) in the [LPR print queue] field.
Uncheck the box labelled [LPR Byte Counting Enabled]
Check the box labelled [SNMP Status Enabled] .
The [Community Name] should normally be set to “public” (unless you have configured
the device to have a custom SNMP community name) and the [SNMP Device Index]
should be set to 1.
Select [OK ].
¾
The Add Printer Wizard will then request that you select the driver to be used for this
printer.
Insert the CD ROM with the
DSm520pf/AC122/AC205
drivers into the workstation and select [Have Disk ].
1
2
3
4